Shenzhen Haixincheng Technology Co.,Ltd
Shenzhen Haixincheng Technology Co.,Ltd is a high-tech enterprise specializing in the design, research and development, system integration and sales of motor, encoder, drive and motion control system.
Add to Cart
High Torque Low Noise 6V 9V 12V Mini Hollow Cup Brushless Motor
Hollow cup motor features:
1) Energy-saving:High energy conversion efficiency,more than 70%.
2) Reliable Operational Stability: Operates quietly and quickly with high efficiency and low resistance.
3) Low Noise : Starting and braking quietly, running with low noise.
4) High Speed : The rpm can reach 4500~26500±10%.
5) Fast Response:Rapid starting and braking with fast response.
Standard Type
| MotorParemeters(25℃) | Part No. | With Hall Sensors | LEC-1625 -011 | LEC-1625 -012 | LEC-1625 -013 | LEC-1625 -014 | LEC-1625 -015 | LEC-1625 -016 | |||||||
| 1 | Nominal Power | P | W | 1.8W | 2W | 1.5W | 1.5W | 1.8W | 1.8W | ||||||
| 2 | Rated Voltage | U | V | 4.5 | 6 | 9 | 9 | 12 | 12 | ||||||
| 3 | No load speed ± 10% | N0 | rpm | 12800 | 13500 | 12600 | 12600 | 13500 | 13800 | ||||||
| 4 | No load current ±50% | I0 | m A | 148 | 120 | 97.4 | 72.4 | 60.2 | 72.7 | ||||||
| 5 | Nominal speed | nN | rpm | 5170 | 5690 | 6970 | 4920 | 5840 | 8080 | ||||||
| 6 | Nominal torque | MN | mNm | 3.33 | 3.2 | 2.28 | 3.29 | 3.23 | 2.26 | ||||||
| 7 | Nominal current | IN | A | 1. 18 | 0.903 | 0.465 | 0.574 | 0.456 | 0.37 | ||||||
| 8 | Stall torque | MH | mNm | 5.82 | 5.79 | 5.39 | 5.64 | 5.95 | 5.76 | ||||||
| 9 | Stall current | IH | A | 1.89 | 1.49 | 0.929 | 0.901 | 0.762 | 0.801 | ||||||
| 10 | Speed constant | Kn | rpm/V | 3100 | 2450 | 1540 | 1530 | 1220 | 1230 | ||||||
| 11 | Torque constant | KM | mNm/A | 3.08 | 3.9 | 6.21 | 6.26 | 7.8 | 7.73 | ||||||
| 12 | Terminal resistance ± 10% | R | Ω | 2.38 | 4.04 | / | 9.99 | 15.7 | / | ||||||
| 13 | Terminal inductance | L | mH | 0.0396 | 0.0634 | / | 0. 163 | 0.254 | / | ||||||
| 14 | Rotor inertia | J | g ·cm2 | 0.428 | 0.428 | 0.428 | 0.428 | 0.428 | 0.428 | ||||||
| 15 | Mechanical time constant | τm | ms | 10.7 | 11.4 | 11.1 | 10.9 | 11.1 | 11.3 | ||||||
| Characteristic parameters | Range of operation | Definition of wiring | |||||||||||||
| 16 | Weight | 38g | Winding of motor | ||||||||||||
| 17 | length of shaft (Acceptance of customization) | U | V | W | |||||||||||
| 18 | Ambient temperature -40℃ ~ +100℃ | Red | Black | White | |||||||||||
| 19 | Max. winding temperature 130℃ | Hall line | |||||||||||||
| 20 | Number of phases 3 | H+5V | HGND | HU | HV | HW | |||||||||
| 21 | Number of pole pairs 1 | Red | Black | Yellow | Brown | Gray | |||||||||
| 22 | Cable length (standard length300mm±10mm) ,Acceptance of customization. | Electric motor cable: Hall sensor: | |||||||||||||
Motor assembly configuration
| Gearbox | Feedback device | ||||||||||||
| Planetary | þEncoder | ||||||||||||
| Standard: | GPA16 | Match: MENC20- 1024 (Magnetic encoder) | |||||||||||
| Reduction ratio X :1 | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 | Optional: ENC20- 1000/ 1024/2000/2048 (Grating encoder) | |||||||
| 3.43 | 3.83 | 11.76 | 13. 14 | 40.30 | 45.06 | 138. 18 | 154.50 | 473.77 | 529.70 | Resolver | |||
| 4.40 | 14.69 | 15.09 | 50.38 | 57.83 | 172.73 | 193. 13 | 592.23 | 662. 15 | If you need other encoders, please consult the manufacturer. | ||||
| 16.82 | 19.36 | 66.38 | 88.55 | 221.68 | 254.45 | 740.32 | 975.38 | Optional brake | |||||
| 74.21 | 292.06 | 24 VDC brake | |||||||||||
| Drive | |||||||||||||
| Drive ( three rings) | Drive ( three rings) | Imported drive | |||||||||||
| Length (mm) | 18. 1 | 21.9 | 2.7 | 29.5 | 33.3 | LDP-4805 | LDV-4805 | Elmo | |||||
| The above is the partial speed ratio of GPA16 , all levels of speed ratio can be selected; Reducer temperature: -40℃ ~ + 100℃, if you need to match other reducer, please consult the manufacturer. | |||||||||||||
| Harmonic gearhead Worm gear Low backlash | |||||||||||||
Test equipment:
FAQ:
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 5 workdays.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q6: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty.
Q7: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%